ICP Computec > ASEM > Ubiquity Overview > Ubiquity Hardware > RK10-11
Ubiquity Inside
cULus Listed / CE

Ubiquity Router RK10-11 Series

  • Ubiquity Software creates a VPN between the Control Center PC and the Router granting access to devices connected via Ethernet and Serial ports
  • Debug, programming and update of the automation devices connected to the RK10/11 via Ethernet and Serial interfaces
  • Proprietary VPN technology designed for Industrial communication
  • MPI protocol support
  • Immediate setup and configuration
  • Firewall friendly
  • RK11 Systems integrate a built-in 2G/3G/3G+ modern to access machines and plants without a wired Internet connection

Ubiquity RK10 and RK11 and the related extended temperature range versions (ET) are systems dedicated to remote assistance based on a 1 GHz ARM Cortex A8 processor enclosed in a “book mount” stainless steel case for DIN rail or wall
mounting, with 9-24 V DC power supply range.

RK families have one 10/100 Mbps Ethernet WAN port for Internet connection, one 100 Mbps Ethernet LAN for automation devices connection, an optoisolated serial interface RS 232/422/485/MPI and one USB 2.0 port. The systems include
one 24 V DC digital input for the security key activation that activates the router also from remote and one 24 V DC digital input for the remote reset function.

RK10 and RK11 include also a low voltage relay output to remote the “UBIQUITY RK enabled for WAN connection” signal and a relay output to remote the “ongoing remote assistance service” signal.

RK11 and RK11 ET integrate a built-in 2G/3G/3G+ EDGE/ HSPA quadriband modem compatible with cellular networks worldwide.

  RK10 - RK10 ET RK11 3G / RK11-ET 3G RK11 4G/LTE RK11 4G/LTE-AM
 cellular  network Standard  

-

 
2G/3G/3G + EDGE/HSPA quadriband modem up to 5,76Mbps upload / 21,6Mbps download 2G/3G/4G LTE pentaband modem up to 50Mbps upload / 100Mbps download 2G/3G/4G LTE pentaband modem up to 50Mbps upload / 100Mbps download
  UMTS/HSPA+: B1/B2/B5 - GSM/GPRS/EDGE: 850/900/1800/1900 MHz FDD-LTE: B1/B3/B7/B8/B20 - TDD-LTE: B38/B40 - UMTS/HSPA+: B1/B8 - GSM/GPRS/EDGE: 900/1800 MHz FDD-LTE: B2/B4/B5/B17 - UMTS/HSPA+: B2/B5
Antenna 1 x SMA connector 1 x SMA connector 1 x SMA connector
SIM 1 x SIM card socked push-push type 1 x SIM card socked push-push type 1 x SIM card socked push-push type
 Remote assistance sw ASEM UBIQUITY Router Runtime
 O.S Installed Microsoft Windows Embedded Compact 7 Pro
 CASE Material Stainless Steel
Mounting DIN rail book mounting holders, Wall book mounting kit included
Size 36x138x116 mm 45x138x116 mm
 Protection grade IP20
 PROCESSOR ARM Cortex A8 processor Freescale® i.MX535 1 GHz (ET i.MX537 800MHz)
 SYSTEM MEMORY - RAM 1GB ( 512MB for RK10-ET )
 MASS STORAGE 256MB Read-Only NAND-Flash for operating system and runtime
4GB eMMC (Solid State Disk) 8bit, file system organization for projects and applications
 LAN LAN1 Ethernet 100 Mbps (RJ45)
LAN2 Ethernet 10/100 Mbps (RJ45)
 USB 1 x USB 2.0
 SERIAL 1 x RS-232/422/485 (DB15M) optoisolated
 digital input in0 Security key for WAN connection activation. Function managed by Control Center
in1 UBIQUITY Router software reset
Type 0 - 24V DC, 500V optoisolated
 Digital  output out0 UBIQUITY Router WAN enabled connection signal
out1 Remote assistance service running signal
Type Output with relay 200mA@24V DC max for contact (N.O. - normally open)
 buttons UBIQUITY Router hardware reset
UBIQUITY Router factory default restore
 power supply unit Input voltage 24V DC (9-36 V DC)
 OPERATING  TEMPERATURE 0° +50°C (ET -20°C · +70°C) 0° +50°C (ET -20°C +60°C)
 APPROVALS CE, cULus

RK10-11 Series Datashseet

ASEM HT2000

RK Configurator

ASEM HT2150 PDF

LEGEND

Alu: aluminium | INOX: Stainless steel true flat | Plastic: Plastic with Polycarbonate | Desk: desktop mount | WALL: wall mount | DIN RAIL: DIN rail mounting | VESA: 75/100 VESA compatible
| ROLEC: Taraplus compatible | RITTAL : CP-S series compatible | PXA: Intel® PXA270 | LX800: Geode LX800 | ATOM: Intel®ATOM Z5XXP | Cel: Intel®Celeron | CelM: Intel® Celeron M |
P: Intel® Pentium | PM: Intel® Pentium M | P4: Intel® Pentium 4 | C2D: Intel® Core 2 Duo | C2Q: Intel® Core 2 Quad | MiniPCI: MiniPCI bus | PC/104plus: PC/104Blus bus,PCI compatible |
PCI: PCI bus | PCIe: PCI Express bus | AGP: AGP bus | UPS: uninterruptible power supply. | RID: redundant power supply | CE5: Microsoft® Windows CE 5.0 | CE6: Microsoft® Windows CE
6.0 | WES: Microsoft® Windows Embedded Standard | XP Pro: Microsoft® Windows XP PRO Sp3 | W7: Microsoft® Windows Seven Professional FES 32/64bit | Res 4: 4-wire resistive touch
screen | Res 5: 5-wire resistive touch screen | GFG: Glass Film Glass touch screen